Description
Test Bomb Baths: Temperature-controlled water bath immerses Copper Strip Corrosion Test Bombs at the required depth per ASTM specifications. Use for testing aviation gasoline, aviation turbine fuel and natural gasoline. Fully insulated, double-wall stainless steel construction. Choice of four-bomb and eight-bomb models. Optional removable test tube rack converts four-bomb model for testing of products not requiring corrosion bomb.
Test Tube Baths: Constant temperature bath immerses 20 test tubes for copper strip tarnish tests of products not requiring a test bomb, including: diesel fuel, fuel oil, automotive gasoline, Stoddard solvent, kerosene and lubricating oil. Operator and equipment are protected by an overtemperature control circuit which automatically interrupts power to the unit should bath temperature exceed a programmed cut-off point. Welded stainless steel inner wall and powder coated steel outer wall construction with built-in support rack. Fully insulated.
Specifications
Conforms to the Specifications of:
ASTM D130, D4048; IP 154 FSPT DT-28-65; ISO 2160; DIN 51759; FTM 791-5309, FTM 791-5325; NF M 07-015
Capacity:
- K64310/K64319: 4 Copper Strip Corrosion Test Bombs
- K64320/K64329: 8 Copper Strip Corrosion Test Bombs
- K64330/K64339: 20 Copper Strip Corrosion Test Tubes
Temperature:
- Range: Ambient to 221°F (105°C)
- Control Stability: ±0.09°F (±0.05°C)
Bath Medium:
- K64310/K64319: 6.1 gal (23.1 L) water
- K64320/K64329: 7.2 gal (27.2 L) water
- K64330/K64339: 7.2 gal (27.2 L) water
Electrical Requirements:
- K64310/K64320/K64330: 115V 60Hz, Single Phase, 10A
- K64319/K64329/K64339: 220-240V 50/60Hz, Single Phase, 5A
Application Configurations
Test Apparatus for Aviation Fuels and Natural Gasoline
- (1) K64310 or K64319 4 Position Copper Strip Corrosion Test Bomb Bath
- (4) K25200 Copper Strip Corrosion Test pressure vessel
- (4) K25080 Copper Test Strip. 12.5×1.5-3.0mm x 75mm to ASTM specifications
- (4) 332-004-004 Test Tube. 25 x 150mm
- (4) 332-004-002 Viewing Test Tube – Protects copper strip during inspection or storage
- (1) K25100 ASTM Copper Strip Corrosion Standards – Colored reproductions of tarnished strips encased in a plastic plaque
- (1) 380-220-001 Silicone Carbide Paper, FEPA Grade, 220 grit – For polishing of copper strips prior to testing – Pack of 50 sheets
- (1) 380-150-003 Silicone Carbide Grain, FEPA grade, 150 grit – For final polishing of copper strips prior to testing – 1 lb package
- (1) K25000 Polishing Vise – Holds copper strip firmly in place without marring the edges. Stainless steel, mounted on a composition base
- (1) 250-000-12F ASTM 12F Thermometer – Range: –5 to +215°F or 250-000-12C ASTM 12C Thermometer – Range: –20 to +102°C
Test Apparatus for Diesel Fuel, Fuel Oil, Automotive Gasoline, Stoddard Solvent, Kerosene, Lubricating Oil, and Biodiesel
- (1) K64330 or K64339 20 Position Copper Strip Corrosion Test Tube Bath
- (20) K25080 Copper Test Strip. 12.5×1.5-3.0mm x 75mm to ASTM specifications
- (20) 332-004-004 Test Tube. 25 x 150mm
- (20) 332-004-002 Viewing Test Tube – Protects copper strip during inspection or storage
- (1) K25100 ASTM Copper Strip Corrosion Standards -Colored reproductions of tarnished strips encased in a plastic plaque
- (1) 380-220-001 Silicone Carbide Paper, FEPA Grade, 220 grit – For polishing of copper strips prior to testing – Pack of 50 sheets
- (1) 380-150-003 Silicone Carbide Grain, FEPA grade, 150 grit – For final polishing of copper strips prior to testing – 1 lb package
- (1) K25090 Multi-Strip Polishing Vise – Similar to K25000 but capable of holding four strips at a time
- (1) 250-000-12F ASTM 12F Thermometer – Range: –5 to +215°F or 250-000-12C ASTM 12C Thermometer – Range: –20 to +102°C
Wounded Warrior Project
