Wounded Warrior ProjectDescription
ERAFLASH flash point tester measures in full compliance with the Continuously Closed Cup flash point testing methods ASTM D6450 and ASTM D7094.
Eraflash
The flash point tester ERAFLASH measures in full compliance with the Continuously Closed Cup flash point testing methods ASTM D6450, ASTM D7094 as well as the European equivalent IP620.
Features
- Inherently safe with no open flame
- Only a very low sample volume of 1-2 mL needed
- Fully compliant with ASTM D6450, ASTM D7094, IP620
- Measurement of fuels, lubricants, fragrances, flavors, paints, …
Measurement Procedure
Just four easy steps are required for a safe flash point testing at maximum precision:
- Enter sample ID and operator name
- Select the measurement standard and add additional parameters (e.g. expected flash point)
- Fill the sample cup with sample, place the sample cup inside the measurement chamber, and close the door
- Press the RUN button
The instrument now visualizes the measurement procedure on the screen showing the sample and oven temperature as well as pressure gauge displaying the pressure increase after ignition. After the measurement the flash point temperature is corrected for the atmospheric pressure and rounded to the next 0.5 °C. The result will be saved in the corresponding result file.
Characteristics of the flash point testing can be seen in the Combustion Graphics™. This makes ERAFLASH the ideal solution for R&D as well as quality control.
Fuel Specifications Testing
In December 2013 ASTM D7094 was accepted as the first official alternative for fuel specification testing as it gives equivalent results to ASTM D93 and even outperforms it in terms of reproducibility:
- Fuel oil (ASTM D396)
- Diesel fuel (ASTM D975)
- Gas turbine fuel oil (ASTM D2880)
- Kerosene (ASTM D3699)
- Diesel Fuel, Biodiesel Blend (ASTM D7467)
More Info
For more information including features & benefits, technical specifications and diagrams, download the brochure below.
